CLAMPS
Pipe clamps, or pipe fixings, are best defined as the support mechanism for suspended pipes, whether that be horizontal overhead or vertical, adjacent to a surface. They are vital in ensuring all pipes are fixed securely while also allowing for any pipe movement or expansion that may occur
Standard clamps are typically fixed using two screws – one on either side of the clamp. They can be lined or unlined, depending on the application and there tends to be a wide range of sizes to choose from.
We manufacture a wide variety of piping clamps such as two bolt pipe clamps, three bolt pipe clamps, Saddle clamps, Extended pipe clamps, Riser clamps and Multiple clamps as stated below:
Standard clamps work by securing two screws in place, one on either side of the clamp. More state-of-the-art versions of standard clamps can include single screw pipe clamps for faster fixing and more advanced two screw clamps that have additional features such as anti-loss washers and captive locking nuts and screws. Three bolt pipe clamps, Extended pipe clamps are also manufactured
Saddle clamps work by fixing over the top of half of the pipe, whilst the other half sits on a flat surface. Saddle clamps, also known as pipe saddles, allow for the addition of branch lines to existing piping systems in temporary or permanent installations. Saddle clamps, also known as pipe saddles, allow for the addition of branch lines to existing piping systems in temporary or permanent installations.
Pipe clamps with rubber lining: The black, EPDM rubber lined clamps are suitable for steel pipes. This is because they have a series of ribs on the inside of the lining that grips the pipe so that they cannot move.
Riser clamps designed to act as a rigid support or guide for vertical pipes suitable for use with all types of pipes. Riser clamps are a two point load bearing component and are usually used for vertical running pipe lines wherein shear lugs are welded to the pipe, the riser clamp top surface contacts the shear lug, and the load is transferred through the legs of the clamps to the support component such as a rigid rod, spring, etc.
Clamps are manufactured as per customer specifications in Carbon steel, Mild Steel, Alloy steel, stainless steel or as per request from customers.
Surface Finish: Self Color, Black, Hot Dip Galvanized, Electro Galvanized, Di-Chromated, PTFE Coated or any other finish as per requirement.